Technical Specifications of Prime Runes and Runic Arrays
Imperial Academy of Magical Studies Dwellindelf Institute of Runic Engineering United Guilds of Aethoria - Technical Documentation Division
Prime Rune Orientation Standards
All runic measurements are taken in relation to the local mana flow lines (ley lines). A standard runic compass is required for proper orientation. The base measurement plane is established by:
- Horizontal Plane: Parallel to the local magical horizon (perpendicular to local mana flow)
- Vertical Plane: Aligned with the primary local ley line
- Reference Point: Natural mana flow moves upward along ley lines
Therefore, a "90-degree Flow Rune" is carved exactly parallel to the local ley line's vertical flow, allowing optimal energy transmission.
The 27 Prime Runes
Flow Runes (7 Total)
- Prime Flow (│) - Vertical line, basic energy transmission
- Curved Flow (⎯) - Horizontal redirection
- Split Flow (⋎) - Controlled energy division
- Merge Flow (⋏) - Energy combination
- Cyclic Flow (○) - Continuous energy circulation
- Spiral Flow (☌) - Gradual energy transformation
- Branch Flow (╋) - Multi-directional distribution
Containment Runes (5 Total)
- Circle Seal (⊕) - Perfect containment
- Square Bind (□) - Stable storage
- Triangle Lock (△) - Dynamic containment
- Hexagonal Chamber (⬡) - Flexible containment
- Octagonal Vault (⦿) - Complex energy storage
Resonance Runes (5 Total)
- Wave Form (≋) - Basic frequency matching
- Harmony Line (≈) - Energy synchronization
- Double Wave (≣) - Frequency amplification
- Cross Wave (⋈) - Frequency mixing
- Star Wave (✺) - Multi-frequency resonance
Grounding Runes (4 Total)
- Earth Spike (⥬) - Direct grounding
- Spread Ground (⇟) - Distributed grounding
- Deep Ground (⥯) - Long-distance grounding
- Cyclic Ground (⥮) - Regenerative grounding
Transformation Runes (6 Total)
- Simple Cross (╳) - Basic energy conversion
- Star Form (✳) - Multi-channel transformation
- Diamond Shift (◈) - Crystalline energy conversion
- Spiral Transform (↯) - Gradual energy alteration
- Gate Form (⍙) - State transformation
- Bridge Form (⋈) - Energy type conversion
Nesting Rules and Guidelines
Basic Nesting Principles
- Inner runes must fit completely within outer runes
- Minimum spacing between nested layers: 1/8th of outer rune's largest dimension
- Maximum nesting depth: 7 layers before instability occurs
- Each nested layer must maintain perfect geometric alignment with outer layers
Nesting Compatibility Matrix
- Containment → Flow: Stable, common
- Containment → Resonance: Stable with grounding
- Containment → Transformation: Requires careful balancing
- Flow → Containment: Unstable, avoid
- Flow → Flow: Stable for parallel flows only
- Resonance → Containment: Excellent for frequency work
- Transformation → Any: Requires master-level expertise
Nesting Ratios
Optimal sizing ratios between nested runes:
- Two layers: 2:1
- Three layers: 3:2:1
- Four layers: 4:3:2:1
- Five+ layers: Fibonacci sequence recommended
Array Construction Guidelines
Basic Array Rules
- Minimum spacing between parallel runes: 1/4 rune height
- Intersection angles must be precise to 0.25 degrees
- Power flow must be balanced across all paths
- Every array requires grounding runes proportional to total power
Critical Angles
- 90° - Perfect flow/blockage
- 60° - Optimal energy division
- 45° - Maximum transformation
- 30° - Resonance enhancement
- 72° - Star pattern formation (five-point arrays)
Material Considerations
Different materials require angle adjustments:
- Pure metals: Standard angles
- Alloys: +0.5° compensation
- Stone: -0.3° compensation
- Wood: +1.2° compensation
- Crystal: Variable (requires testing)
Safety Standards
Minimum Safety Requirements
- Double redundant grounding
- Power limiters every 5 runes
- Emergency break points every 7 runes
- Failure containment zones every 12 runes
Emergency Modifications
In case of array instability:
- Add grounding runes at 30° to failing section
- Increase containment spacing by 15%
- Add resonance dampeners at array endpoints
- Establish secondary power paths
Runic Tools and Measurement
Required Tools
- Runic compass (0.1° precision)
- Mana flow meter
- Resonance tuning forks
- Precision carving tools
- Angle verification crystals
Measurement Standards
- All angles measured from local ley line vertical
- Spacing measured in standard runic units (1 RU = 1/12th prime flow rune height)
- Power flow measured in standard mana units (MU)
- Resonance measured in standard frequency units (RFU)
Quality Control
Every runic array must be:
- Tested with standard power flow
- Checked for resonance stability
- Verified for grounding effectiveness
- Inspected for geometric precision
- Documented with full specifications
Certification Requirements
Master Runesmith Qualification
- 10 years practical experience
- Perfect angle carving test (0.25° tolerance)
- Complex array design examination
- Safety protocol certification
- Guild membership in good standing
Note: This document contains critical safety information. Improper runic construction can result in catastrophic failure. Always consult a certified runesmith for practical applications.
Approved by:
- Imperial Academy of Magical Studies
- Dwellindelf Institute of Runic Engineering
- United Guilds of Aethoria Technical Board